Peterson's New 5050H Stationary Electric Chipper

Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved.

Peterson 5050H Delimber Debarker Disc Chipper
The Peterson 5050H Delimber Debarker Disc Chipper is the latest new stationary, electric chipper by Peterson Pacific Corp, which produces high quality low bark content chips for wood pulp and pellets, processing whole trees in one continuous operation. The 5050H features a feed throat that can accept up to a 23-inch (56 cm) diameter single tree or multiple smaller stems.

Chipping production rates up to 150 tons (136 tonnes) per hour can be achieved depending on chip size and wood characteristics.

Configurations and Features

The 5050H can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. The standard three-pocket disc produces chips from 5⁄8 to 1 ¼ inches (16–32 mm) long, while the optional four-pocket disc produces chips from ½ to 1 inches (13–25 mm) long.

Peterson’s heavy-duty 66-inch diameter, 4 ¾ inch thick (168 x 12 cm) chipper disc has replaceable ½-inch (13 mm) wear plates.

Traditional Babbitt-type knives or Key Knife components are available.

The stationary 5050H can be configured from 600 to 1000 hp (447–745 kW) at the disc depending on the needs of your application. An additional 600 hp (447 kW) electric motor powers the needs of the hydraulic system.
By on
About Curtis Sund
Curtis is a writer and technologist at My Little Salesman, where he spends most of his time enhancing the online marketplace. A Nebraska native, Curtis spends most of his free time with family traveling the U.S. and Germany.
Company profiles
Peterson Pacific Corp.
More in Forestry Equipment News