Coring Truck Utilicor MD-300 Truck Mounted 2015 Ford F-550 6.7L Powerstroke Diesel ONLY 12,000 ACTUAL MILES!
NOW OFFERING EASY BUSINESS FINANCING!
WE TAKE TRADES!! Please call Gary with any questions or to discuss any additional details including price!
* 2015 Ford F-550 Core Drill Truck
* Utilicor MD-300 Core Drill
* NEW this truck was $200,000!! Used 2-3 years then parked. ONLY 12,708 actual miles!
* 6.7L Powerstroke Diesel
* Automatic Transmission
* Hydraulic Brakes
* Tool Boxes
* PTO
* Power Steering
* Cruise Control
* AM / FM / CD Radio
* Air Conditioning
* Tilt Steering Wheel
* Factory Auxiliary Switches
* Coring and Manipulator Assembly: Fully maneuverable Traversacor™ core-zone extension system (Patented) which allows the core drill to extend up to 12” out from the back of the truck and travel the full width of the deck, giving the crew the flexibility to core anywhere within a 24 square foot area behind the truck without repositioning the vehicle. 12” to 24” diameter wet drilling core bit capacity with linear glide system and proportional orbital hydraulic drum feed system.
Water system: 100 USG plastic water tank.Hydraulically driven high-pressure water pump, 5.5 G.P.M. @ 1500 P.S.I. Electric water pump, 3 G.P.M. @ 30 P.S.I. and includes 1/2” diameter water hose running to gland assembly on cutter drive shaft for cooling of cutter head and additional hose for cleaning and cooling outside of cutter.
* Stabilizers: Two rear mounted hydraulic stabilizer legs.
* Drive system: Power take-off installed on truck transmission.
* Hydraulic System: Hydraulic load sense pump, drive line mounted to PTO with MH3 HydraPak hydraulic cooling system complete with15 gallon hydraulic reservoir. Includes suction and return lines, sight glass, temperature gauge, fill port, drain port and oil filter.
* Control System: Plug in remote pendant control with 15 foot cable extension for operation of manipulator/cutter assembly and stabilizers, with boom-mounted control panel emergency shutdown switch, and digital coring drum R.P.M. read out.
* 12", 18" and 24" Core Bits
* Tool Boxes: 4 deck mounted tool boxes. (2 underdeck 84” L x 20” H x 20” D) (2 deck mounted x 84” L x 34” H x 18” D) and open deck mounted storage area.
* Dual LED flashing amber strobe lights
* 3,000 Watt Inverter
* Winterizing System
* 500 LB Core Hoist
* Stabilizer Deployed Warning System
* Slider Master Slide-Out Storage Tray (70” x 30”)
* 100 Gallon Onboard Water Tank
* Drum Speed: 0-280 RPM
* Coring Drum Diameter: Up to 24”
* Coring Drum Depth: Up to 22”
VIN: 1FDUF5GT3FEA77630
Odometer Reads: 12,708
Engine Hour Meter Reads: 1,897
Engine Idle Hours: 1,325
PTO Hours: 87
EXTERIOR
Paint: CAB: Good
BED: Good
Body: Good
Bumpers: Front: Good
Glass: Good
Tires: 225/70R19.5 16/32” Average Tread Life All Around
Wheels: Steel with Aluminum Covers. Good condition
Lights: Good. Operation normal
Brakes: Hydraulic. Operation normal
Hydraulics: Hydraulic system and operates as it should
INTERIOR
Seat: Good
Dash: Good
Floor: Good
DRIVE
Engine Type: 6.7L Powerstroke V8 Diesel
Engine Condition: Good. Good start, runs good. Good compression. Cylinder balance normal. No blowby. Good Power.
Trans Type: Automatic
Trans Condition: Good. Operation normal
Final Drives: Good
Suspension: Spring
Power Steering: Good. Operation normal
Steering: Good
Top Speed: 65 MPH +
DIMENSIONS
GVW: 19,500 LB
W: 98” x H: 8’ 8” x L: 25’ 6”
Wheelbase: 189”
Cab to Axle: 108”
Weight: Estimated 16,000 LB
SUMMARY
WOW! This truck new is $200,000. It was used for 2-3 years and has sat. It has only 12,708 miles and 1,897 engine hours! Turn key and ready to go!
INSPECTOR
Robert Sorrells 801-473-6800
LOCATION: Orem, UT 84057 NEAR: Salt Lake City Area
View all our inventory at www.GlobalRemarketing.net
FINANCING
We have financing options available. Please call Candi for information at 801-358-9635.
SHIPPING ESTIMATES
We have network of shipping brokers coast to coast allowing for the best shipping rates possible. We pride ourselves in getting quick quotes and for the lowest cost possible. For a more accurate detailed shipping price to your location, please call Candi at 801-358-9635