Product Description
2019 CAT 232D Skid Steer, 51 HP, 6,931lb Weight, NEW Factory Engine, NEW Drives, Rebuilt Pumps, all with less than 1,000 hours, (dealer installed, have paperwork), New tires, Enclosed cab with heat, NO air, Pins are tight. Length With Bucket 11.28ft in, Width Over Tires 5.01ft in, Ground Clearance 5.7in, Height To Top Of Cab 6.4ft in, Wheelbase 3.59ft in, Length W/O Bucket 9.06ft in, Clearance At Max Lift And Dump 7.62ft in, Reach At Max Lift And Dump 30.16in, Wheel Base 3.59ft in, Bucket Pin Height - Carry Position 9.7in, Clearance At Maximum Lift And Dump 86.9in, Length - Without Bucket 109.3in, Bucket Pin Height - Maximum Lift 9.89ft in, Maximum Overall Height 153.31in, Height - Top Of Cab 6.41ft in Bumper Overhang - Rear Axle 38.9in, Reach - Maximum Lift/Dump 28.5in, Turning Radius From Center - Inc Bucket 88.71in, Length - With Bucket On Ground 135.31in, Vehicle Width Over Tires 60in, Operating Specifications Breakout Force - Tilt Cylinder 4056lb, Breakout Force - Lift Cylinder 3814lb, Rated Operating Capacity 1750lb Rated Operating Capacity With Optional Counterweight 1795lb, Tipping Load 3500lb, 4-Cylinders Engine Make 2236, Engine Model 3024C, Gross Power 51hp, Net Power 48hp Power Measured @3000rpm, Displacement 134cu in, Engine Model Cat 3034C, Operational Weight 6931lb, Fuel Capacity 17.2gal, Max Speed 6.2mph, Hydraulic System Fluid Capacity 14.6gal, Operating Speed 6.2mph, Loader Operating Load Rating 1750lb, Bucket Capacity 0.6yd3, Hydraulic Pump Flow Capacity 14.6gal/min, Hydraulic System Loader Hydraulic Pressure 3100 psi, Loader Hydraulic Flow 14.7 gal/min. Excellent running machine with many new key components. Extra hubs included.