2025 Rock Systems 101-36-4 Conveyor

Rock Systems Front End Loader Hopper with Belt Feeder, Model 101-36 complete as follows:

a) 14’-5” wide hopper opening with 18 tons struck storage capacity (based on material weighing 100 lbs/cu ft.); hopper constructed of 1/4” thick steel plate with 6” x 4” rectangular tubing at the top of the hopper and angle iron reinforcing at the mid-section and bottom section; self-relieving tapered hopper bottom opening to minimize bridging; full length skirtboards with 3/4" x 6" adjustable rubber flashing to prevent leakage between hopper bottom and belt feeder; discharge gate to control material flow from the hopper; bolt on wing extensions.

b) Heavy duty semi-portable support structure constructed of 4” x 4” square tubing with wide flange beam skid frame. 6’ tall bulkhead on both sides of structure.

c) 36” wide roller belt feeder with Nord inverter duty 15 h.p. gearmotor drive; 16” diameter rubber lagged head pulley mounted on 3-7/16” diameter 1045TGP shafting; head pulley nip guards; 8” diameter snub pulley mounted on 1-15/16” diameter 1045TGP shafting; snub pulley guard; 16” diameter self-cleaning tail pulley mounted on 2-7/16” diameter 1045TGP shafting; Dodge SCM pillow block bearings; screw take-up assemblies; tail terminal guard; CEMA “C” 5” diameter conveyor idlers mounted on close centers; heavy duty 4 ply conveyor belting with 1/4” x 1/16” rubber covers vulcanized endless; Flexco Rockline belt scraper with urethane blade.

d) One finish coat polyurethane gray paint for all equipment and one finish coat polyurethane safety yellow paint for the guarding.

e) Variable speed drive wired into main disconnect and mounted on a skid structure.