MyLittleSalesman.com - MLS Listing # 14668475

2026 Caterpillar AP1055-08 Asphalt Paver

Buyer Activity

Viewed

Not yet

Shared

Not yet

Saved

Not yet

Product Specifications

Year	2026
Category	Asphalt Pavers
Manufacturer	Caterpillar
Model	AP1055-08
Condition	Used
Stock Number	EQ0183300
MLS Number	14668475
Serial Number	P2600100
Usage	825 Hours

Additional Details

Rating	As-Is

Product Description

ADAPTER, SDX SCREED PLATE
ADAPTER, VIBE SCREED
AP1055 08A MTS ASPHALT PAVER
APRON, STR HYD FOLD, STD ENTRY
CONTROL, BASE CAT G&S SYSTEM
CONTROL, PENDANT
CYLINDER KIT, PSA
ENDGATE, POWER
ENGINE, CAT C7.1
EXT, POWER FOR POWER ENDGATE
EXTENSION, 6" AUGER, PAIR
EXTENSION, MAINFRAME, POWER
FILMS, ANSI
FILTERS, AIR COOLER
FLASHING, SIDE, SHORT
FLASHING, STR HYD FOLD SE, RGD
GUIDE, STEERING
HEATER, ENDGATE
HITCH, HYD PREP, TRACTOR
HOPPER, STD ENTRY, LOW SIDE
HOSE, REEL WITH WAND
INDICATOR, TOW POINT
INSTRUCTIONS, ANSI
LANE 3 ORDER
LIGHT, HAZARD
LIGHTS, WORKING
Online Owner's Manual
PAINT, STANDARD, ANSI/ISO
PANEL, POWER SUPPLY
PLATE, STANDARD WEAR LIFE
PLATES, SDX SCREED, SM XL
PRODUCT LINK, DUAL PLE683
Remaining Factory Warranty Machine still undoer facotry warranty.
SCREED, SE60 V
SEAT, VINYL, DELUXE
SENSOR, AUG SONIC, CONV SONIC
SENSOR, GRADE, SONIC, EXTEND
SENSOR, HOPPER MATL LEVEL/TEMP
SENSOR, SLOPE
STEERING, SPRING RETURN
TANK, WASHDOWN
TRACK, MTS, SMOOTH
UMBRELLA, CAT
VENTILATION SYSTEM, NO CANOPY
VISORS, DISPLAY
VISORS, DISPLAY, TRACTOR

$670,000 USD

Located in Hugo, MN, US

Email Seller (855) 952-___ SHOW
NUMBERCall Seller

Seller Information

Ziegler CAT

13822 West Freeway Drive
Hugo, MN 55038
United States

+18559525674

Get Directions

View all Inventory (608)

Notes

Get Shipping Quotes Save Price Alert Send to a Friend Print Listing

Inspection Report

GENERAL COMMENTS

GENERAL COMMENTS	Normal

ARRIVAL AT SITE

CHECK CRITICAL FLUIDS (ENGINE OIL AND ANTI-FREEZE) BEFORE STARTING	Normal
IMPLEMENT SITE SPECIFIC SAFETY MEASURES (CHOCKS, LOCK OUT TAG OUT, ETC)	Normal
PERFORM SITE SAFETY CHECK	Normal
START, OPERATE AND WARM-UP MACHINE COMPONENTS (CYCLE HYDRAULIC CYLINDERS, MOVE AROUND TO CIRCULATE FINAL DRIVE, DIFFERENTIAL AND TRANSMISSION FLUIDS). THIS MAY TAKE 5-10 MINUTES TO PERFORM. IT IS IMPORTANT TO DRAW A GOOD OIL SAMPLE FROM CIRCULATED OIL. NOTE ANY USUAL NOISES AND SMOKE.	Normal
TAKE PICTURES FROM ALL 4 CORNERS OF THE MACHINE	Photo Required
VERIFY S/N & HOURS OF MACHINE AND SERVICE LEVEL (TAKE IMAGE OF MONITOR)	Yes

SAMPLE MACHINE

ENSURE ALL OIL SAMPLE LABELS ARE COMPLETED CORRECTLY	Normal
SUBMIT ALL SOS VIA SOS INSPECT	Yes
TAKE OIL SAMPLE FROM HYDRAULIC, FINAL DRIVES, PUMP DRIVE AND AUGER	Normal
TAKE OIL SAMPLE FROM WARM ENGINE	Normal

ENGINE

CHANGE ENGINE OIL AND FILTER, SAVE AND CUT FILTER AND EXAMINE FOR DEBRIS	Normal
CHANGE PRIMARY AIR FILTER	Normal
CHECK COOLANT LEVEL AND FREEZE POINT. RECORD FREEZE POINT:	Normal
INSPECT AFTERCOOLER	Normal
INSPECT AIR FILTER RESTRICTION INDICATOR	Normal
INSPECT AIR INTAKE SYSTEM FOR LEAKS	Normal
INSPECT ALL ENGINE DRIVE BELTS AND PULLEYS	Normal
INSPECT BELLY PAN FOR DEBRIS BUILD UP	Normal
INSPECT COOLANT HOSES	Normal
INSPECT CRANKCASE BREATHER, CLEAN IF REQUIRED	Normal
INSPECT ENGINE FOR LEAKS	Normal
INSPECT EXHAUST SYSTEM	Normal
INSPECT RADIATOR FOR DIRT BUILD UP AND LEAKS	Normal
INSPECT TURBO FOR SIGNS OF LEAKS	Normal
INSPECT WATER PUMP FOR LEAKS	Normal
REMOVE AND CLEAN/REPLACE PRIMARY FUEL FILTER	Normal
REPLACE SECONDARY FUEL FILTER	Normal

HYDRAULIC

CHANGE HYDRAULIC RETURN FILTER, CUT AND INSPECT FOR DEBRIS	Normal
INSPECT HYDRAULIC CYLINDER CONDITION AND LEAKS	Normal
INSPECT HYDRAULIC HOSE/LINES CONDITION AND LEAKS	Normal
INSPECT HYDRAULIC PUMPS FOR LEAKS	Normal

FRAME/CHASSIS

CHECK FRAME AND COMPONENTS FOR CRACKS/DAMAGE	Normal
CHECK FUEL TANK BREATHER AND CLEAN/REPLACE	Normal
CHECK OIL LEVELS IN; HYDRAULIC PUMP DRIVE, AUGER DRIVE GEAR BOX, DRAG CONVEYOR GEAR BOXES, CHECK DEBRIS ON MAG PLUG	Normal
CHECK TRACK TENSIONER	Normal
CLEAN PAVER VENTILATION SYSTEM BLOWER	Normal
INSPECT AUGER DRIVE CHAIN	Normal
INSPECT AUGER/SCREW CONVEYOR	Normal
INSPECT CONVEYOR DRIVE CHAIN	Normal
INSPECT ROPS/FOPS STRUCTURE, CRACKS, DAMAGE AND LOOSE HARDWARE	N/A
INSPECT STEPS, GRAB IRONS AND SHEET METAL CONDITION	Normal
INSPECT TRACK ASSEMBLY	Normal
LUBE IDLER WHEEL BEARING	Normal

DRIVE TRAIN

CHECK FINAL DRIVES FOR LEAKS, WEAR AND DAMAGE	Normal
REPLACE FINAL DRIVE, AUGER, AND PUMP DRIVE OIL	Normal

ELECTRICAL/CAB

CHECK A/C AND HEATER OPERATION, CLEAN CAB FILTER	N/A
CHECK ALL IMPLEMENT CONTROLS, WEAR AND OPERATION	Normal
CHECK ALL OPERATING LIGHTS, HEAD,FLOOD, BRAKE, TURN AND DOME	Normal
CHECK CAB COMPONENTS, GLASS, DOOR, WINDOWS, FLOOR MAT, HANDLES, SWITCHES, AND CONTROLS	N/A
CHECK GAUGE CLUSTER FOR OPERATIONS	Normal
CHECK PRODUCT LINK OPERATIONAL STATUS, IF EQUIPPED	Normal
CHECK SEAT, SUSPENSION, CUSHIONS AND ARM RESTS, CONDITION, LOOSENESS AND OPERATION	Normal
DOCUMENT ANY LOGGED EVENTS/FAULT CODES FROM THE DASH	Normal
INSPECT BATTERY, CABLES AND SWITCHES	Normal
INSPECT WIPER AND WASHER FLUID PUMP, OPERATIONS, AND CONDITION	N/A
VALIDATE HOURS AND LOCATION OF MACHINE IN VISION LINK TO ENSURE ACCURACY	Yes

MISC

CHECK ALL FLUID LEVELS IN ALL COMPARTMENTS; ENGINE, HYDRAULIC, FINAL DRIVES, DIFFERENTIALS, TRANSFER GEARS	Normal
CHECK ALL PIVOT POINTS FOR LUBRICATION, (GREASE, OIL OR DRY LUBE)	Normal
GREASE MACHINE AND NOTE WEAR, CONDITION OF AREAS GREASED, ARTICULATION, LINKAGE, PIVOT POINTS, ETC	Normal
INSPECT OIL ON DIP STICK	Normal
NOTE ANY OPERATIONAL NOISE, VIBRATIONS, ETC	Normal
REPLACE SCREED FUEL FILTER	Normal

SAFETY

BACK UP ALARM/TRAVEL ALARM	Normal
BEACON LIGHT/HAZARD FLASHERS	Normal
CONTROL LOCKS	Normal
HORN	Normal
INSPECT SEAT BELT, CONDITION AND LOG INSTALL DATE (CHANGE EVERY THREE YEARS)	Normal
O&M MANUAL	Normal

UPON PM COMPLETION

COMPLETE CHECKLIST BEFORE LEAVING THE SITE LOCATION	Normal
DRAIN FILTER 12 HOURS BEFORE CUTTING, BAG AND FILTER MEDIA AND SEND TO MPLS/ALTOONA AS NEEDED FOR FURTHER ANALYSIS	Normal
ENSURE THE MAG PLUG/MAGNETIC SCREEN BAG LABEL IS FILLED OUT CORRECTLY AND COMPLETELY. SEND TO MPLS/ALTOONA AS NEEDED FOR FURTHER ANALYSIS	Normal
INSTALL NEW WINDOW STICKERS (PM SERVICE DUE OR ANNUAL INSPECTION), TAKE PHOTO OF WINDOW STICKERS & DOCUMENT NEXT SERVICE INFORMATION	Yes
LEAVE JOB SITE CLEAN AND SAFE	Yes
RUN MACHINE, VERIFY NO LEAKS & ENSURE ALL CAPS ARE TIGHTLY REPLACED	Normal
TAKE PICTURES OF REPLACED FILTERS WITH LABEL OF SMU ON CANISTER	Photo Required

Make us an offer or send us an email

Your name

Your business name (optional)

Your email

Your phone

Your message

Send Email

Still Looking?

See all Asphalt Pavers available
See more Caterpillar Asphalt Pavers
See all Asphalt Pavers by Ziegler CAT
See all Construction Equipment by Ziegler CAT
Submit a free Want-to-Buy Ad

Some other Asphalt Pavers from Ziegler CAT

2015 Caterpillar AP-655D Asphalt Paver

$41,000 USD

ADAPTER, VIBE SCREED, AP655D, AP655F MTS ASPHALT PAVER, HRC, APRON, HYD FOLD, MTS, AUGER 18" EXTENSION PER SIDE, CLEAN EMISSIONS MODULE,...

Located in North Mankato, MN, US

2023 Vogele 2000-3I Asphalt Paver

$241,000 USD

Crown Control, Lighting, Night Paving, Mirrors, Push Roller - Truck Hitch, Regulatory Marking, Screed Extensions - Height Control, Screed...

Located in Shakopee, MN, US

2022 Weiler P65 Asphalt Paver

$94,900 USD

2-speed hydrostatic drive, 39” of ground track contact, 4 element electric heated screed, 6-ton hopper, 7’ 8” to 13’ standard paving width,...

Located in Altoona, IA, US

2023 LeeBoy 8520C Asphalt Paver

$155,000 USD

2 SPEED PROPEL, 8 FOOT TO 15.5 FOOT PAVING WIDTH, ELECTRIC SCREED HEAT, END GATES, FRONT PUSH ROLLERS, KUBOTA ENGINE, LEE BOY PAVER, LEEBOY...

Located in Saint Cloud, MN, US

1988 Barber-Greene BG750 Asphalt Paver

$22,000 USD

BG750, Hour meter has been replaced,, unknown machine hours. Currently reads 208 hours,

Located in Saint Cloud, MN, US