2024 NEW EXA 4100CF PNEUMATIC PIG STORAGE SILO TANK NEW GENERATION ASSEMBLY PROCESS We are proud to introduce the new generation of the 2023 EXA SILO which has a new technology fabrication process and application of welding by robotic welding throughout the entire unit. This gives us the following improvements: * The applied welding is a robotic process applied by a SEAM WELDER machine, which has a 100% penetration process in the joints and unions of the whole unit. * The aesthetics of the welding is much better. * In the leak test certification when the automatic robotic process is applied, the leaks are almost deemed to be at zero, having a low to no chance of leaking. * There are fewer joints to be welded together in the engineering of the unit. * Fabrication of the tanker is much cleaner. POWERED BY 45 YEARS OF MANUFACTURING EXPERIENCE * Pressure: 15 PSI, tested at 23 PSI Gross * Overall Length: 62 ft.Height: 13 ft. 3.4 in.Weight: 30,865 Lbs.Width: 132 in. * Material: Carbon Steel * Suspension: Hutch spring suspension with three variable sections * Single Hopper(s): Six (6) discharge cones with aerators with discharge 6 in. butterfly valve shall: 3/16 in. A572-55 High resistance steel welding: Inside and out, minimal tie-ins with automatic welding * Connections: One (1) 4 in. tank pressurization line Inlet: 3 in. with aluminum quick coupling, 3 in. check valve, 3 in. auxiliary connection, and 3 in. butterfly valve outlet: One (1) Rear of 5 in. diam with six butterfly valves Shut Off External Venting/Reliefs: Two (2), one in the airline and another one in the front of the tank axles: One (1) 30,000 lbs., 102 in. wide, 77.5 in. track TP type with the automatic slack adjuster brake: Air brakes with two boosters FMVSS-121, ABS 2S/1M Bendix Bumper: 4 in. X 4 in. tube per Dot Frame: Full Length 1/4 in. A-36 Formed Landing Gear: Five (5) pairs of screw Type 3 in. diam * Tires: Four (4) 11 X 24.5 R * Upper Coupler: Adjustable 3/8 in. plate with Holland kingpin Wheels: 10 hole Budd wheels powder coated white access * Ladder: One (1) in the rear anyways: One (1) 20 in. sealed on the side (Betts or Knappco) * External Coating: Jones-Blair two coats of polyurethane on an epoxy primer (4-6 mils DFT)Paint Prep: * All steel surfaces sandblasted inside and out * Conspicuity Tape: 3M Per Dot Fenders: Two (2) steel madeLights: Sealed harness and recessed GROTE LED lights per DOT * Mud Flaps Two (2) Anti-sailVacuum * Manometer: Two (2) manometers, one of airline and another one for the tank paint * Color: Available in a variety of different colors. We make it easy and affordable for you to finance your next truck or trailer quick and easy. Call JEFF ELLISON Today at (972) 210-2142 Hablamos español