Product Description
Item #1 - Harris Industrial Horizontal Two Ram Baler Model
HRB-918W, 42 Ton steel fabricated heavily reinforced
mainframe, 12” diameter main cylinder, 8’ diameter bale ejector cylinder, 6” diameter
bale release cylinder, bale separation door & release, 200 h.p. electric/hydraulic
power package, 700 gallon hydraulic oil tank, 3 h.p. electric oil cooler, 15
h.p. strapper circulation pump motor, oil filtration system. Weather resistant
steel enclosures with main disconnect, electric motor starters for all system
motors including, Reduced Voltage Starter for the 200 h.p. motor, deck mounted
electric/hydraulic operators control console with electronic display. Other features:
74” wide x 109” long feed hopper, 57” x 96” charge box opening, compression
chamber: 40” x 29” x 60”, bale size: 45" x 31" x 64" (variable), bale volume: 40 cubic feet - 52 cf expanded (approximate), Cycle time:
100 to 150 seconds (depending on material type). Approximate capacity: Up to 19
tons per hour (bulk corrugated paper @
25%) or Up to 45 tons per hour (solid waste @ 25%). Common materials: Bulk
OCC, news print, PET/HDPE bottles, whole aluminum cans, solid waste, etc. Model:
HRB918W-BR-BD-2; Serial Number: 2557; Date of Mfr. 1995.
*The included hydraulic bale release, hydraulic
bale separation door, and 200 h.p. power package are all original factory
provided upgrade options.
Item
#2 - Krause
60” wide x 44’ long “slider belt” feeder/conveyor - 14’ horizontal loading section with 30’ long incline
section to the baler hopper, 15 h.p. electric motor, shaft mounted gear reduction
box, V-Belt drive with guard, 67” tall full length steel retaining walls on feeder
incline section, 1” thick UHMW floor liner with ½” thick rubber belt bolted to
steel slide bands, dual roller chain positive drive. Date of Mfr: 1998; S/N
98KRA00100.
Item
#3 – ACCENT-LP Model 330 Bale Wire Tie System, upgraded with ACCENT module and electronic control panel,
Model #331 (for 11-gauge wire), S/N 3660.
Used equipment......Three
Item Package Total $135,000.00
Condition: Well maintained and running when taken out of service.
Feeder floor UHMW liner requires replacement at the feeder discharge end.
Transport
information:
Two truckloads required for all items. Baler
load: 37’ long, 10’ 6” tall, 11’ 8” wide (with bale ejection cylinder
removed), Weight: 83,500 lbs).
Feeder load: 47’ long, 8’ tall, 8’ 8 ½”
wide, legal weight: 30,000 lbs (Estimate).