Biomass & Recycling Equipment For Sale

814 results
Featured Item
2016 Powerscreen PHOENIX 2100 Trommel
$310,000 USD
Call for rental prices
2016 Powerscreen Phoenix 2100 Trommel,
Usage177 Hours
MLS Number9137058
LocationKENT, Washington, US
Listed byPowerscreen of Washington
Featured Item
MGL HANDY SCREEN Screen
$40,000 USD
Call for rental prices
Very clean MGL Handy Screen Low hours. Ready to work
Usage500 Hours
MLS Number9137054
LocationKENT, Washington, US
Listed byPowerscreen of Washington
Featured Item
Balzer stackable Conveyors
Call for price
Balzer stackable conveyor available in 40', 50', 60' and 70' lengths, , Available in 24", 30", 36" 42", and 54" , Side mounted motor with V-belts to shaft mounted speed...
MLS Number9541417
LocationSherwood, Oregon, US
Listed byBalzer Pacific
2015 Vermeer BC700XL wood chipper
At auction
2015 Vermeer BC700XL wood chipper, 202 hours on meter, Kohler ECH740 two cylinder gas engine, 25 HP, Smart feed control system, 6" material capacity, 6" x 8" infeed opening, Dual...
Usage202 Hours
Stock NumberDE4947
MLS Number9577023
LocationMOUNT VERNON, Illinois, US
Listed byPurple Wave Auction
Montgomery 34" Horizontal Wood Grinder
$37,500 USD
Product No. 4994 , 34" Horizontal Wood Grinder , 150HP Direct Coupled Motor , Rear Suction Discharge , Reconditioned , Ready To Ship , PRICE:$37500 ...
Stock Number4994
MLS Number9491591
LocationGeorgia, North Carolina, US
Listed byCarolina Used Machinery
Woodchuck 1200 DISC Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. NON RUNNER. BAD STARTER. FUEL CAP MISSING. CAT 4 Cylinder Diesel (Missing Air Cleaner Cover), Steel Wheels, 245/75R16, Pintle Hitch, Body Damage/Rust. Hours...
Stock Number40982
MLS Number9561068
LocationWest Haven, Connecticut, US
Listed byHousby
Altec DC1317 Chipper

2010 Altec DC1317 Chipper

At auction
NO TITLE PER STATE REQUIREMENTS. UNKNOWN RUNNING CONDITION-LESS KEYS. MAJOR RUST THROUGHTOUT. Kubota 4 Cylinder Diesel, Steel Wheels, 245/80R17, Less Batteries, Shoot Tower...
Stock Number40568
MLS Number9547900
LocationSyracuse, New York, US
Listed byHousby
Woodchuck HYROLLER 1200G Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. NON RUNNER. Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Less Batteries. Showing 98,808 Hours. Location: Houston, TX Serial: 1W9DH15196G200430 - For More...
Stock Number40752
MLS Number9538357
LocationHouston, Texas, US
Listed byHousby
Vermeer BC1000XL Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. UNKNOWN RUNNING CONDITION- DEAD BATTERY. CAT C2.2 Diesel, Steel Wheels, 225/75R15, Pintle Hitch, Engine Access Panel Corroded- Operator Could Not Open, Fuel...
Stock Number39950
MLS Number9540728
LocationElgin, Illinois, US
Listed byHousby
Bandit 200 XP Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. CAT 4 Cylinder Diesel (Oil Leak Noted), Steel Wheels, 245/75R16, Pintle Hitch, Coolant Leak Noted. Showing 6,843 Hours. Location: Aiken, SC...
Stock Number40589
MLS Number9575898
LocationAiken, South Carolina, US
Listed byHousby
Altec DC1217 Chipper

2009 Altec DC1217 Chipper

At auction
NO TITLE PER STATE REQUIREMENTS. UNKNOWN RUNNING CONDITION-LESS KEYS. MAJOR RUST THROUGHOUT. 4 Cylinder Diesel, Steel Wheels, 245/80.17, Pintle Hitch. Hours Unavailable. Location: Syracuse,...
Stock Number40526
MLS Number9537128
LocationSyracuse, New York, US
Listed byHousby
Bandit 200 XP DISC Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. CAT 4 Cylinder Diesel, Steel Wheels, 215/85R16, Pintle Hitch, Body Damage/ Rust Throughout. Showing 4,249 Hours. Location: Syracuse, NY...
Stock Number42014
MLS Number9554075
LocationSyracuse, New York, US
Listed byHousby
Bandit 200 XP DISC Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. Kubota 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Dead Batteries, Body Damage/Rust. Showing 1,128 Hours. Location: Syracuse,...
Stock Number40998
MLS Number9561496
LocationSyracuse, New York, US
Listed byHousby
Bandit 200 XP DISC Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. BAD CLUTCH. THROTTLE CABLE BROKEN. CAT 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Rust Throughout. Hours Unavailable. Location...
Stock Number40990
MLS Number9559535
LocationNorth Brookfield, Massachusetts, US
Listed byHousby
Altec CHIPPER Chipper

2000 Altec CHIPPER Chipper

At auction
NO TITLE PER STATE REQUIREMENTS. CRANKS- WONT START. ENGINE NOISE. CAT, Steel Wheels, 225/75R15, Pintle Hitch, Rust Throughout. Showing 3,520 Hours. Location: Bardstown, KY Serial:...
Stock Number40147
MLS Number9548751
LocationBardstown, Kentucky, US
Listed byHousby
Bandit 200 XP DISC Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. BAD ALTERNATOR. Kubota 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Rust Throughout, Dead Battery. Showing 25 Hours. Location:...
Stock Number42016
MLS Number9550785
LocationSyracuse, New York, US
Listed byHousby
Altec DC 1317 Chipper

2011 Altec DC 1317 Chipper

At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. Kubota 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Rust Throughout. Showing 1,935 Hours. Location: Syracuse, NY Serial:...
Stock Number41000
MLS Number9550786
LocationSyracuse, New York, US
Listed byHousby
Woodchuck CHIPPER Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. BAD BATTERY. CAT, Steel Wheels, 225/75R15, Pintle Hitch, Rust Throughout. Showing 1,925 Hours. Location: Bardstown, KY Serial:...
Stock Number40146
MLS Number9548750
LocationBardstown, Kentucky, US
Listed byHousby
Vermeer BC1000XL Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. CRANKS- WONT START. Cummins B3.3 Diesel, Steel Wheels, Pintle Hitch. Showing 1,599 Hours. Location: Burlington, WI Serial: 1VRY11195A1015169  - For More...
Stock Number40784
MLS Number9542358
LocationBurlington, Wisconsin, US
Listed byHousby
Altec CHIPPER Chipper

2000 Altec CHIPPER Chipper

At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. BAD BATTERY. CAT, Steel Wheels, 225/75R15, Pintle Hitch, Rust Throughout. Showing 1,701 Hours. Location: Bardstown, KY Serial:...
Stock Number40145
MLS Number9548749
LocationBardstown, Kentucky, US
Listed byHousby
Altec DC1217 Chipper

2010 Altec DC1217 Chipper

At auction
NO TITLE PER STATE REQUIREMENTS. NON RUNNER. IGNITION SWITCH AND KEY MISSING. Kubota V3600T Diesel, Steel Wheels, 245/75R16 (Flat), Pintle Hitch, Rust Throughout. Hours Unavailable. Location...
Stock Number40773
MLS Number9552355
LocationPelham, Alabama, US
Listed byHousby
Woodchuck WC12A Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. NON RUNNER. ENGINE DOES TURN BY HAND. BAD STARTER. CAT, Steel Wheels, 225/75R15, Pintle Hitch, Rust Throughout. Showing 1,106 Hours. Location: Bardstown, KY...
Stock Number40143
MLS Number9548747
LocationBardstown, Kentucky, US
Listed byHousby
Altec DC1317 Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. NON RUNNER. MURPHY SWITCH BROKEN. ALTERNATOR REMOVED. Kubota 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Less Keys, Rust Throughout. Hours...
Stock Number40772
MLS Number9558359
LocationAlbany, New York, US
Listed byHousby
Altec DC1317 Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. NON RUNNER. ALTERNATOR REMOVED. Kubota 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Rust Throughout. Hours Unavailable. Location: Albany, NY...
Stock Number40771
MLS Number9558361
LocationAlbany, New York, US
Listed byHousby
Morbark STORM 12 DISC Chipper
At auction
NO TITLE PER STATE REQUIREMENTS. THIS UNIT RUNS. CAT 4 Cylinder Diesel, Steel Wheels, 245/75R16, Pintle Hitch, Body Damage/Rust. Hours Unavailable. Location: Garden City, NY Serial:...
Stock Number42009
MLS Number9561494
LocationGarden City, New York, US
Listed byHousby
Did you find what you were looking for? Yes No

Biomass & Recycling Equipment for Biomass Fuel and Power

Biomass recycling equipment is a broad category that includes any piece of heavy equipment capable of producing biomass fuel. The term “biomass fuel” simply refers to fuels developed from organic materials such as wood, animal waste, aquatic plants, and municipal solid waste. Therefore, biomass recycling equipment can include shredders, grinders and chippers as well as compactors, balers and anything else used to handle organic recyclables.

In fact, the only difference between biomass and traditional recycling equipment is that traditional recycling equipment is used to process inorganic waste such as rubber, plastics, and glass.

As an advocate of green energy production, My Little Salesman wants to see the world benefit from reusing waste in the form of wood, plastics, and construction and demolition materials. We are incredibly proud to think of how the biomass recycling equipment listed on our marketplace will help keep landfills down and energy costs to a minimum.

How to Choose the Right Biomass & Recycling Equipment

There’s a lot of different recycling equipment to choose from, so the first step is to identify which type of waste your company produces:

Commercial Compactors:

  • Wet waste that could leak needs a self contained compactor to minimize any potential smells and spills as well as insects and other scavengers. A self contained compactor does not have a removable container, so the whole compactor needs to be taken to a landfill to be dumped.
  • Dry or semi-dry waste can be compacted with a stationary compactor. Stationary compactors have a removable container that can be emptied by a recycling company. They are especially good for cardboard and paper products.
  • Large volumes of plastic, cardboard, shrink wrap, aluminum, metal, or rubber tires will need to be properly gathered with an industrial baler.

Commercial Shredders:

  • Basic metals, plastics and textiles can be passed through a standalone shredder.
  • When an object is so large that it needs to be shredder twice, it goes through a primary shredder first, followed by a secondary shredder. Sometimes a primary shredder is enough, depending on the material.

What to Check For When Buying Used Recycling Equipment

When inspecting used recycling equipment...

  • Try to get the serial number and contact the manufacturer. The parts and services department should have information on how long each part lasts and when it needs to be replaced.
  • Though not all types of equipment will have them, missing serial numbers are a definite red flag.
  • Ask to see the recycling equipment process material that is close in composition to what you plan to process.
  • Make sure the shredded product is of good quality and ready to be reused.