2023 Superior 36X80PRSC Conveyor

SUPERIOR 36” X 80’ PORTABLE RADIAL STACKING CONVEYOR

CONVEYOR FRAME
-   MAIN FRAME: 30”DEEP TRUSS
-   CHORD ANGLES: 3” X 3” X ¼”
-   BOTTOM CHORD ANGLES: BOTTOM CHORD UPSIZED BETWEEN PINPOINTS TO 4” X 3” X 1/2”
-   LATTICE MEMBERS: 1-1/2” X 1-1/2” X 3/16”
-   CONTAINERIZED: NOT INCLUDED

DRIVE SPECIFICATIONS
-   DRIVE: CLASS I HEAD DRIVE
-   GEAR REDUCER: DODGE SHAFT MOUNT
-   BACKSTOP: INSTALLED IN REDUCER
-   MOTOR: 30 HP TEFC
-   V-BELT DRIVE: WITH DRIVE GUARD
-   CAPACITY: 750 STPH OF 100 PCF MATERIAL, 25° SURCHARGE (90% FINES, 10% SPHERICAL LUMPS, 6” MINUS)
-   BELT SPEED: 400 FPM
-   DRIVE PULLEY: 18” DIAMETER, 3/8” HERRINGBONE LAGGED DRUM
-   TAIL PULLEY: 16” DIAMETER, CEMA CHEVRON® WING
-   SHAFTS: TURNED AND POLISHED
-   BEARINGS: DODGE
-   TAKE-UP: SCREW TYPE
-   *BACKSTOP INCLUDED: INSTALLED IN REDUCER

PORTABILITY
-   CONVEYOR SPLICE: MANUAL TOP FOLDING HEAD SECTION
-   UNDERCARRIAGE: MANUAL RAISE WITH PIN LOCK ADJUSTMENT
-   AXLE TYPE: TELESCOPING AXLE, ROAD PORTABLE
-   TRANSPORT AXLE: DUAL (4) 11R-22.5 TIRES AND WHEELS
-   RADIAL AXLE: MANAUL SWIVEL BOXES
-   RADIAL TRAVEL: MANUAL
-   FIFTH WHEEL: NOT INCLUDED
-   ANCHOR PIVOT: MAINTAINS TAIL END DURING RADIAL TRAVEL
-   BRAKES: NOT INCLUDED
-   LIGHTS: NOT INCLUDED
-   MUD FLAPS: NOT INCLUDED
-   AXLE JACKS: NOT INCLUDED
-   LANDING GEAR: NOT INCLUDED
-   TOWING EYE: PINTLE HITCH TYPE
-   *MANUAL TOP FOLD: MANUAL TOP FOLDING HEAD SECTION
-   *ANCHOR PIVOT PLATE: MAINTAINS TAIL END DURING RADIAL TRAVEL

CONVEYOR COMPONENTS
-   BELTING: 2-PLY 1/8 X 1/16 220PIW
-   BELT SPLICE: FLEXCO MECHANICAL STEEL FASTENERS
-   SCRAPERS: SUPERIOR EXTERRA® PRIMARY BELT SCRAPER
-   IDLERS: CEMA B, 5” DIA. STEEL ROLLS, SEALED FOR LIFE BALL BEARINGS
-   IDLER SEAL: SUPERIOR STANDARD SPINGUARD® SEAL
-   LOAD AREA: 20° TROUGH, 12-16” SPACING
-   TROUGH: 35° ON 4’ SPACING
-   RETURNS: STEEL CANS ON 10’ SPACING
-   RADIAL RECEIVING HOPPER: SLOPED, 5’ LONG, BOLT ON DESIGN
-   RADIAL HOPPER LINER: NOT INCLUDED
-   GATHERING TROUGH: 5’ LONG WITH ADJUSTABLE RUBBER FLASHING
-   *PRIMARY SCRAPER: SUPERIOR EXTERRA® PRIMARY BELT SCRAPER
-   *RADIAL RECEIVING HOPPER: SLOPED, 5’ LONG, BOLT ON DESIGN

ADDITIONAL SPECIFICATIONS
-   GUARDING: FOR DRIVE AND TAIL PULLEYS, V-BELT DRIVE AND RETURN IDLERS. GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER RESPONSIBLE TO HAVE GUARDING INSPECTED
-   VOLTAGE: 480 V / 3 PH / 60 HZ
-   CORD HOLDERS: (1) SET BENT PIPE STYLE
-   CONTROL PANEL PLATE: NOT INCLUDED
-   PAINT: 1 COAT PRIMER, 1 COAT FINISH ENAMEL, SUPERIOR GRAPHITE GREY (12-00636)
-   GUARD PAINT: YELLOW
-   IDLER PAINT: POWDER COATED SUPERIOR ORANGE
-   OWNER’S MANUAL: (1) COPY IN ENGLISH INCLUDED FOR OPERATION AND MAINTENANCE