2026 ALDURA 185BBL ALUMINUM VACUUM TRAILER NON-CODE Vacuum Tank Trailer

NEW ALDURA 185BBL ALUMINUM VACUUM TRAILER NON-CODE

Capacity: 7,770 gal. + 1% Expansion
Commodity: Transportation of oilfield fluids such as water, mud, oil field waste.
Pressure: Tested at 23 PSI
Relief Settings: 22 IN HG External, 17 PSIG Internal
Overall Length: 48 ft.
Height: 10 ft. 9 in.
Weight: 13,080 Lbs.
Width: 102 in
Material: Aluminum 5454H-32
Suspension: 2xHendirckson Intraax 30K and 1xMeritor MTA23T
Baffles: Four (4) of 1/4 in. thk
Bulkheads: 3/8" Aluminum 5454H Non-code ASME Shape
Compartments: Single
Overturn Protection: Three (3), at front, middle and back of tank
Shell: 1/4" aluminum shell 5454H-32
Rings: Thirteen (13) rolled of 3"x2" C-channel profile
Welding: Inside and out, minimal tie-ins with mig welding
Connections: 3 in. vacuum female camlock fitting on middle top front bulkhead
Outlet: One (1) 6 in. TTMA flange.
Shut Off:
Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front
with drain
Venting/Reliefs:
1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in.
blow down line at rear
Axles:
Three (3) 2x Hendrickson 30,000lbs each 1x lift front axle 23,000 lbs. 120 in. wide, 71.5 in.
track MTA23T. Ferrous hub, cast drum, ABS.
Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M module anti-lock brake system
Bumper: 3 in. X 6 in. tube per DOT
Sub-frame: High Strenght Steel painted in aluminum color
Landing Gear: 2 speed JOST Heavy Duty
Tires: Twelve (12) 11 X 24.5 R, Cut and chip
Wheels: Twelve (12) All-Aluminum 24.5"
Upper Coupler: Bolt on adjustable 3/8" steel plate
Access Ladder: One (1) safety driver side access ladder with handrails
Manways:
Three (3) on top of the tank, and one (1) on the rear bulkhead. All of 20 in. aluminum
domed style with plates swing bolts and wing nuts
Walkway:
Driver side, with handrails, middle ladder, toe kicks, thru tread anti-slip walkway from the
front to the top rear manway.
External Coating: Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT)
Internal Liner: Hempel 10-15 mil DFT epoxy liner
Paint Prep: All steel surfaces sandblasted
Conspicuity tape: 3M Per DOT
Hose Tray: 3/16"x 27ft formed hose tray with 1/4 in. supports on both sides
Fenders: Two (2) aluminum front fenders with mudflaps