2024 EXA 165BBL VACUUM ALUMINUM Vacuum Tank Trailer

165BBL Aluminum Vacuum Trailer Non-code

Capacity: 6,930 gal. + 1% Expansion
Commodity: Transportation of oilfield fluids such as water, mud, oil field waste.
Pressure: Tested at 23 PSI
Relief Settings: 22 IN HG External, 17 PSIG Internal
Overall Length: 45 ft.
Height: 11 ft.
Weight: 11,300 Lbs.
Width: 102 in
Material: Aluminum 5454H-32
Suspension: Air Ride 30,000 lbs. each capacity
Baffles: 1/4 in. thk with 20" openings
Bulkheads: 3/8" Aluminum 5454H Non-code ASME Shape
Compartments: Single
Overturn Protection: Two (2), at front and back of tank
Shell: 1/4" aluminum shell 5454H-32
Stiffeners: Thirteen (13) rolled C-channel profile
Welding: Inside and out, minimal tie-ins with mig welding
Connections: One (1) 4" vacuum inlet front connector
Outlet: One (1) 6" outlets with female connector and butterfly valve
Shut Off: 4" Ball type primary in front manway and 4" ball type secondary 12 Gal. on driver's side front with drain
Venting/Reliefs: 1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in. blow down line at rear
Axles: Two (2) 30,000 lbs. each, 120 in. wide, 77.5 in. track TP type with automatic slack adjuster; 49" spread.
Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system
Bumper: 4 in. X 4 in. tube per DOT
Frame: High Strenght Steel painted in aluminum color
Landing Gear: 2 speed Heavy Duty
Tires: Eight (8) 11 X 24.5 R 16 ply, all-terrain tires
Upper Coupler: Adjustable plate with king pin at 22" setting; 44.5" Height.
Wheels: Eight (8) All-Aluminum 24.5"
Access Ladder: One (1) safety driver side access ladder with handrails
Walkway: Driver side, with handrails, toe kicks, thru tread anti-slip walkway with ladders in the middle and in the back.
Manways: Three (3) on top of the tank (Betts or Knappco), one (1) on the rear bulkhead and one (1) on top front used as a shut off. All of 20 in. domed style with plates swing bolts and wing nuts
External Coating: Hempel two coats of polyurethane on an epoxy primer on steel components
Internal Liner: Hempel DFT epoxy liner
Paint Prep: All steel surfaces shotblasted inside and out
Conspicuity tape: 3M Per DOT
Hose Tray: 3/16"x 25ft formed hose tray with 1/4 in. supports on both sides
Fenders: Two (2) aluminum front fenders with mudflaps
Lights: Sealed harness and Optronics LED Glolights per DOT. Two rear work lights with integrated switches.
Mud Flaps: Two (2) anti-sail
Tool Box: One (1) on driver's side
Vacuum Manometer: One (1) located in the rear
Fluid level: Tube-style sight glass with drain in the rear of the trailer.
Pump Tray: Left front with pump tray
Under tank optionals: Additional tool boxes, tires carrier, chain carrier, stainless steel frames